IMPLEMENTACIÓN EN LABVIEW DE UN MODELO DE PANEL FOTOVOLTAICO (IMPLEMENTATION IN LABVIEW OF A PHOTOVOLTAIC PANEL MODEL)

Leonel Estrada Rojo, Nimrod Vázquez Nava, Julio Ortega Alejos, Jonathan Boyso Méndez, Marco Antonio Rodríguez Gaytán

Resumen


Resumen
En el presente artículo se muestra la obtención de un modelo matemático que representa el comportamiento de un panel fotovoltaico ante diferentes condiciones ambientales (temperatura e insolación), utilizando solamente ecuaciones explicitas y con datos obtenidos de la hoja de datos del panel fotovoltaico. Las ecuaciones fueron programadas utilizando el lenguaje LabVIEW aunque pueden ser realizadas en cualquier otro lenguaje sin complicaciones. Los resultados muestran un comportamiento similar entre el modelo y las curvas mostradas en la hoja de datos.
Palabras Clave: LabVIEW, modelo matemático, panel fotovoltaico, simulación.

Abstract
This paper shows the procurement of a mathematical model that represents the behavior of a photovoltaic panel under different environmental conditions (temperature and insolation), using only explicit equations and with data obtained from the photovoltaic panel data sheet. The equations were programmed using the LabVIEW language although they can be done in any other language without complications. The results show a similar behavior between the model and the curves shown in the data sheet.
Keywords: LabVIEW, mathematical model, photovoltaic panel, simulation.

Texto completo:

213-220 PDF

Referencias


Malinowski, Mariusz & Leon, Jose & Abu-Rub, Haitham. (2017). Solar Photovoltaic and Thermal Energy Systems: Current Technology and Future Trends. Proceedings of the IEEE. PP. 1-15. 10.1109/JPROC.2017.2690343.

N. C. Sahoo, I. Elamvazuthi, N. M. Nor, P. Sebastian and B. P. Lim, "PV panel modelling using Simscape,”2011 International Conference on Energy Automation and Signal”, Bhubaneswar, Odisha, 2011, pp. 1-4.

M. Galád and P. Špánik, "Design of photovoltaic solar cell model for stand- alone renewable system," 2014 ELEKTRO, Rajecke Teplice, 2014, pp. 285-288.

M. H. de Souza, A. F. Cupertino, L. P. Carlette, F. H. de Oliveira and H. A. Pereira, "Comparison of solar panel models for grid integrations studies: Harmonics and voltage disturbances,”2013 IEEE PES Conference on Innovative Smart Grid Technologies (ISGT Latin America)”, Sao Paulo, 2013, pp. 1-5.

Jothi Kumar, Prasanth & Manghani, Himanshu & Pillai, Dhanup & Thanikanti, Sudhakar Babu & Miyatake, Masafumi & Natarajan, Rajasekar. (2018). Analysis on solar PV emulators: A review. Renewable and Sustainable Energy Reviews. 81. 149-160. 10.1016/j.rser.2017.07.039.

J. L. Díaz-Bernabé and A. Morales-Acevedo, "Photovoltaic module simulator implemented in SPICE and Simulink," 2015 12th International Conference on Electrical Engineering, Computing Science and Automatic Control (CCE), Mexico City, 2015, pp. 1-5.

R. A. P. Franco and F. H. T. Vieira, "Analytical method for extraction of the single-diode model parameters for photovoltaic panels from datasheet data," in Electronics Letters, vol. 54, no. 8, pp. 519-521, 19 4 2018.

Prakash, R. Arul and S. Singh. “Designing and Modelling of Solar Photovoltaic Cell and Array.” (2016).






URL de la licencia: https://creativecommons.org/licenses/by/3.0/deed.es

Barra de separación

Licencia Creative Commons    Pistas Educativas está bajo la Licencia Creative Commons Atribución 3.0 No portada.    

TECNOLÓGICO NACIONAL DE MÉXICO / INSTITUTO TECNOLÓGICO DE CELAYA

Antonio García Cubas Pte #600 esq. Av. Tecnológico, Celaya, Gto. México

Tel. 461 61 17575 Ext 5450 y 5146

pistaseducativas@itcelaya.edu.mx

http://pistaseducativas.celaya.tecnm.mx/index.php/pistas