Análisis del efecto de la subcontratación no-confiable, en la estrategia de producción y mantenimiento de un sistema con deterioro de la calidad
Resumen
la producción, mantenimiento y subcontratación
no-confiable para un sistema de producción
sujeto a un deterioro progresivo. Considerando
un stock de seguridad en la estrategia de producción, asegurando un nivel de servicio por
la incertidumbre del sistema. El deterioro impacta
negativamente en la tasa de defectos,
ocasionando problemas de calidad. La estrategia
de mantenimiento consiste en una reparación
imperfecta, reduciendo parcialmente los efectos del deterioro. Ademas debido a la reducción de la
capacidad de producción causada por el
deterioro, se puede utilizar la subcontratación
para satisfacer parte de la demanda. El objetivo
del estudio es desarrollar una política de control
que regule las estrategias de producción, subcontratación y mantenimiento, minimizando el
costo total incurrido. Por lo que se propone un
modelo de optimización para determinar los
valores óptimos de los parámetros de control,
dando solución al problema.
Palabras clave
Texto completo:
PDFReferencias
Abernathy, F., Dunlop, J., Hammond, J., & Weil, D. (2000). Control your inventory in a world of lean retailing. Harv Bus Rev 78(6), 169–176.
Alfieri, A., & Brandimarte, P. (2005). Stochastic programming models for manufacturing applications: A tutorial introduction. In: Matta, A., Semeraro, Q. (Eds.), Design of Advanced Manufacturing Systemas, Models for Capacity Planning in Advanced Manufacturing Systems. Dordrecht, Netherlands: Springer.
Chiu, S., Wang, S., & Chiu, Y. (2007). Determining the optimal run time for EPQ model with scrap, rework, and stochastic breakdowns. European Journal of Operational Research 180, 664–676.
Cho, D., & Palar, M. (1991). Service level approximations for multiechelon inventory systems. . European Journal of Operational Research 51 (1), 1-23.
Dahane, M., Dellagi, S., Clémentz, C., & Rezg, N. ((2011)). Development of joint maintenance and production strategies in a subcontracting environment. Int J Prod Res 49(23), 6937–6961.
Hsu, L.-F., & Kuo, S. (1995). Design of optimal maintenance policies based on on-line sampling plans. . European Journal of Operational Research 86(2), 345–357.
Jean, A. (2012). Simultaneous determination of production lot size and process parameters under process deterioration and process breakdown. OMEGA:The Internationa lJournal of Management Science , 40: 774-81.
Kazemi Zanjani, D., Ait-Kadi, M., & Nourefath, M. (2010). Robust production planning in a manufacturing environment with random yield. European Journal of Operational Research 201, 882-891.
Lan, Y., Liu, Y., & Sun, G. (2009). Modeling fuzzy multi-period production planning and sourcing problem with credibility service levels. Journal of Computationa land Applied Mathematics 231(1), 208–221.
Lee, H. (2008). The investment model in preventive maintenance in multi-level production
systems. International Journal of Production Economics 112, 816-828.
Lee, H., Chandra, M., & Deleveaux, V. (1997). Optimal batch size and investment in multistage production systems with scrap. Production Planning and Control, 8(6),
-596.
Leung, S., Tsang, S., Ng, W., & Wu, Y. (2007). A robust optimization model for multi-site
production planning problem in an uncertain environment. European Journal of
Operational Research 181 (1), 224-238.
Liao, G., Chen, Y., & Sheu, S. (2009). Optimal economic production quantity policy for
imperfect process with imperfect repair and maintenance . European Journal of
Operational Research 195, 358–363.
Mula, J. (2006). Models for production planning under uncertainty: A review. International
Journal of Production Economics 103 (1), 271-285.
Panagiotidou, S., & Tagaras, G. (2010). Statistical process control and condition‐based
maintenance: a meaningful relationship through data sharing. Production and
Operations Management 19(2) , 156–171.
Panda, D., Kar, S., Maity, K., & Maiti, M. (2008). A single period inventory model with
imperfect production and stochastic demand under chance and imprecise
constraints. European Journal of Operational Research 201, 158-170.
Radhoui, M., Rezg, N., & Chelb, i. A. (2010). Integrated maintenance and control policy
based on quality control. Computers & Industrial Engineering 58(3), 443–451. Rivera-Gomez, H., Gharbi, A., Kenne, J., Montano-Arango, O., & Hernandez-Gress, E. (2018). Subcontracting strategies with production and maintenance policies for a manufacturing system subject to progressive deterioration. International Journal of
Production Economics, 200, 103-118.
Tan, B. (2004). Subcontracting with availability guarantees: production control and
capacity decisions. 36(IIE Trans 8), 711–724.
Tapiero, C. (1986). Continuous quality production and machine maintenance. Naval
Research Logistics Quarterly 33 (3), 489–499.
Wu, Y. (2006). Robust optimization applied to uncertain production loading problems with import quota limits under the global supply chain management environment. International Journal of Production Research 44 (5), 849-882.
Copyright (c) 2023 Héctor Rivera Gómez, Jaime Garnica González, Jesús Manuel González González
Este obra está bajo una licencia de Creative Commons Reconocimiento-NoComercial 4.0 Internacional.